Track Your Installers' and Sub-Tier Crews' COIs, W-9s and Licenses
You're the sub to the GC — and the GC to your crews.
The general contractor holds you to their insurance minimums, and every installer or crew you send in their place has to meet them too. Drop in the certificates and W-9s you already have: TrackMyVendor reads each one, checks the crew against your minimums and the state license board, and shows who is short. Whoever is missing something gets one secure link, and is asked for the renewal before it lapses.
You set it up once. Every crew is checked after that.
Most of the paperwork is already in someone's inbox. The work is reading it, and noticing when it runs out.
You, once — about 10 minutes
- 1 Drop in the certificates and W-9s you have. Each is read as it lands, so the stack in the inbox becomes a list of who is covered and who isn't.
- 2 Set the minimums your GCs hold you to — general liability, auto, workers' comp and umbrella — and the documents every crew owes you.
- 3 Send a link to the crews still missing something. An installer uploads from a phone between jobs, no account.
TrackMyVendor, every day after
- Compares each installer's certificate with the limits your GC requires of you, and names the line that falls short.
- Keeps a crew's workers' comp exemption on file beside its certificate, so the premium auditor's question has an answer.
- Re-checks crew trade licenses against the state database every day for the states we sync.
- Nudges a crew that hasn't uploaded three days after the link went out, with the same link.
- Emails each crew before its policy lapses, with a fresh link in their copy — so the renewal arrives before the next job, not after it.
- Lists every crew that can't go out this week in your Action Queue and the Monday summary.
Dropping in a whole folder of certificates at once, groups with their own minimums and the emails to crews before a policy lapses start on Starter; reading certificates one by one, the license check, the three-day nudge and the Monday summary are on every plan. Compare plans.
Why a crew's paperwork lands on you
A specialty contractor sits in the middle: insured to the GC's standard above, responsible for the crews below. Three places that shows up.
The GC's requirements flow down
Your subcontract with the GC sets the limits, the additional insured wording and often the requirement that anyone you hire carries the same. When the GC audits its own subs, a crew of yours without a current certificate is your problem, not theirs.
The premium audit charges you for them
At the end of your policy year, your carrier's auditor asks for a certificate for every 1099 crew you paid. Payments to a crew with no proof of their own coverage are usually added to your payroll, and your premium goes up. See workers' comp audits and general liability audits.
The check goes out before anyone looks
Installers get paid weekly, and the office paying them is rarely the office holding the certificates. The fix is knowing who is current before the check is cut. See insured before payment.
What a specialty contractor gets
The certificates you already have, read
Upload the ACORD 25s and W-9s sitting in your inbox. Carrier, policy numbers, limits and every coverage line's dates come off the certificate; legal name, TIN and tax classification come off the W-9. How COIs are read.
Your own packet on every crew's link
On Starter, require the documents your GCs require of you: the additional insured endorsement, or a workers' comp exemption where a one-person crew has one. On Pro, add your own subcontract and hold harmless agreement as blank forms the crew downloads, signs and sends back. Onboarding checklist.
Crews and suppliers kept apart
The supply house and the equipment rental company are on the same vendor list as your installers, but they don't owe you a trade license. Put them in their own group with a lighter list, or waive a coverage they will never carry, and they stop showing up as Non-Compliant.
W-9s ready for January
Ask for the W-9 in the same request as the certificate. When 1099s come due, the owner downloads the W-9 list with full TINs in one click. W-9 tracking.
Specialty contractors who track their crews here
- Site work and excavation — lower-tier subs for trucking, survey and paving, plus the suppliers that deliver to the job.
- Flooring and tile — installation crews paid per job, many of them one or two people.
- Painting and finishes — smaller painting crews held to the same packet the GC asks of you.
- Landscaping and snow removal — seasonal crews whose certificates have to be current before the season starts.
- Concrete and masonry — finishers, pump operators and haulers on short notice.
- Telecom and tower — climbing, rigging and engineering subs, with high auto and umbrella limits.
How one floor-covering contractor runs it
Based on a real TrackMyVendor customer. Names and details changed.
A floor-covering contractor works with about twenty installation crews, most of them small. Compliance is run from accounts payable.
Their setup
- Every crew on one list, with an email address. Each crew's contact email is on file, so every request and reminder can reach them.
- Minimums that are enforced. $1M on general liability, auto, workers' comp and umbrella, the same bar their GCs set. A certificate under it marks the crew Non-Compliant the day it arrives.
- Every crew's license matched. Each installer's trade license is matched to the state's licensing database and re-checked as the state publishes.
- All four renewal emails on. Crews hear at 90, 60, 30 and 7 days before a policy lapses, each email carrying their upload link.
A normal week
Monday morning is compliance morning. The AP clerk opens the Action Queue, sees every crew with a lapsed or short certificate, and sends all of them their upload link in one go. Crews who don't upload get a second nudge on their own three days later.
Installers are slow to send paperwork, which is why the list matters more than the email: before a crew is paid or scheduled, the office can see in one place whether it is covered today.
Which plan: enforced minimums and the license check are on every plan; the 90/60/30/7-day emails to crews are on Starter. Compare plans.
Simple, transparent pricing
Every plan reads certificates and checks crew licenses against the state databases. Start free with your first 25 crews.
Free
Organize your roster and run COI tracking at zero cost. Free forever, no credit card.
- ✓AI COI parsing & W-9 parsing — carriers, limits, dates and TINs read for you
- ✓50-state license tracking, plus automated license verification against state databases
- ✓Secure link onboarding — documents arrive through a secure upload link, no account needed
- ✓Document vault — contracts, licenses, W-9s and insurance, filed by category
- ✓Weekly compliance digest — a summary email of upcoming expirations
- ✓Timestamped audit trail — the full history of every certificate
- –Renewal reminders are sent by you — one click emails the upload link
Starter
Flat, predictable pricing for active general contractors and property managers.
- ✓Everything in Free
- ✓Up to 200 crews — eight times Free’s 25, with no per-record fees
- ✓Automated renewal reminders — email alerts at 90/60/30/7 days to your team and the crew
- ✓Projects & job sites — group crews by job, with per-project coverage rules
- ✓Calendar feed — deadlines live in Google Calendar, Outlook or Apple Calendar
- ✓Bulk roster import — from a CSV or a certificate archive
- ✓QuickBooks Online — compliance status on each matched vendor record, kept current automatically
- ✓2 user seats — invite a second team member or coordinator
Pro
Full automation, endorsement checks and integrations for growing teams.
- ✓Everything in Starter
- ✓Unlimited crews — past Starter’s 200, still with no per-record fees
- ✓AI endorsement verification — reads the additional insured, waiver of subrogation and primary & non-contributory pages
- ✓Unlimited users & roles — access for foremen, office managers and admins
- ✓API & integrations — the API, webhooks, Zapier, Make, Slack and Teams
- ✓Insurance audit report — every sub's coverage and gaps over your policy year, for the premium audit
- ✓Third-party categories — vendors, tenants, renters and franchisees on their own lists
- ✓QuickBooks auto-sync — new and changed QuickBooks vendors reach your roster within minutes
PreQual
Add to Starter or Pro. Not available on Free.
Vet subs from their documents, not a questionnaire.
- ✓Prospects — send a sub one link with your own questionnaire to fill in, see what's in, then approve up to a job size, approve with conditions or decline
- ✓Safety documents read for you — the EMR from the EMR letter, TRIR and DART from the OSHA 300A
- ✓Three years of 300As — 3-year TRIR and DART beside the BLS average for the sub's trade
- ✓A scorecard per sub — each check against your limits, no overall score; compare up to five side by side
- ✓Bonding letters read — surety and limits against your minimum
- ✓Re-qualification and Export for Bids — ask approved subs again every 12 or 24 months; list who’s qualified for the job size and copy their emails
Figures are read from the documents, not verified with the carrier, rating bureau, surety or OSHA.
Onsite
For each job site switched on, on Starter or Pro. Not available on Free.
Know who is on site, and that their company is covered.
- ✓A QR poster at the gate — workers scan with the phone camera, no app or account, in English or Spanish
- ✓Each crew checked on arrival — the company’s certificate of insurance and license, against your requirements
- ✓Monitor first, enforce when ready — see who would be turned away before you turn anyone away
- ✓A live roster — who’s on site by company, one-day passes, an updated COI requested automatically
- ✓Evening heads-up — which companies would be stopped tomorrow, the night before
- ✓End-of-day headcount — by company, with visitors and hours, for the daily report
Ending a site stops its charge, prorated. Workers pay nothing and are never texted or emailed.
No contracts. Cancel anytime. See the full plan comparison →
Frequently asked questions
Is this different from COI tracking for general contractors? +
It's the same product. The difference is where you sit: a specialty contractor is insured to a GC's standard and holds its own crews to it. If you run the job yourself and hire every trade, the general contractor page is written for you.
Do my installers need an account? +
No. Each crew gets a secure link by email. They open it on a phone, upload the certificate, W-9 and anything else you require, and it lands on their record. Nothing to install and no password.
What about a one-person crew with no workers' comp? +
Require the state's workers' comp exemption certificate instead (required documents are on Starter), or waive the workers' comp line for that crew alone. A waiver is recorded with who granted it, why and when, and the requirement stays in place for everyone else.
Can suppliers sit on the same list? +
Yes. Put them in their own group with a lighter list, usually just the W-9 and a certificate, or waive the coverages a supplier will never carry. Groups with their own minimums are on Starter; a separate document list per group is on Pro.
We already have most of the certificates. Do we have to ask for them again? +
No. Upload what you have and each one is read on arrival. Only the crews missing something need a link. On Starter and up you can drop in a whole folder of certificates at once.
Know which crews are covered before they go out
Drop in what you have today. The rest gets one link.
Start freeExplore More
General Contractor Compliance Software
Subcontractor compliance software for GCs — licenses, COIs & W-9s
COI Tracking for Homebuilders
Trade contractor insurance and licenses across every build
Contractor Onboarding Software
Onboard subcontractors without the back-and-forth
COI Tracking Software
Track certificates of insurance automatically
License Verification
Search 1M+ licenses and monitor your sub roster daily
AI COI Parsing
Reads dates, limits and carriers from every certificate